At Southern Roofing Systems of Spanish Fort, we pride ourselves on prioritizing the needs of our clients.
14 stories

What is a square in roofing?



Spanish Fort roofer services

What is a square in roofing? What does it mean when someone says they have 30 squares of roofing shingles on their roof? What are the measurements for a square? How many shingles are in a square? How many bundles of shingles do I need for a 12×12 roof? How many bundles cover a square? Is the square footage of a house the same as the roof? What do you need to figure out how many squares your roof has and what should you use as a measurement for your house’s square footage. These questions and more will be answered in this article.

What are the measurements for a square?

One “Roofing Square” is equal to 100 square feet of roofing. When someone says they have 30 squares of roofing shingles on their roof, it means that their roof has 3,000 square feet for the entire surface.

Figuring out how many squares your roof has?

If you need to determine how many squares your roof is, first measure the length and width of your house. Then, multiply them together. After that, divide the number you got by 100 to get your total number of squares. Finally, multiply that number by 1.3 for a low incline. Let us explain.

Getting Exact measurements is quite difficult and could be risky

It would be complex and even risky to get an exact measurement of your roof’s square footage. There are too many things that can go wrong, such as slips and falls, weather issues, and more. So, if you need a more accurate measurement, it is best to contact your local roofing contractor or carpenter to take measurements of your roof or help you figure out how many squares you have. Or you can always contact us for a free estimate. 

But you can get an approx estimate

But you can get a rough idea to find out how many bundles of shingles you need to buy by using a simple multiplication method. The number that you see on the packaging of your shingles is always per square and it will help you figure out how many squares there are and how much coverage your roof needs.

Formula to calculate the area of your roof

You can get a pretty good idea of your roof’s square footage yourself. To calculate the approximate square footage of your roof, you will need to measure the length and width of your house. Multiply both numbers together to figure out how many square feet of roofing your house is.

How to safely get the required measurements

To safely measure the length and width of your roof you do not need to climb on top of your roof. Rather, you can walk around the length and count your steps. Each step is approximately two feet. Then, multiply the number of steps by 2 to get your total length in feet. It is best to use a measuring tape if you are not sure how long each step should be.


For example, if you have a rectangle that is 40 feet long and 20 feet wide, then you would multiply those two numbers together to get an estimation of how many square feet it is. In this case, the roof would be approximately 800 square feet. Now, divide that number by 100 to get your total number of squares. In this situation, you would have approximately 8 squares of roofing shingles on your roof.

Incorporating the inclination

Now the area occupied by your home does not equal the same as the area of your roof. The latter is often larger than the former because it needs to include space for such things as ventilation and access to make repairs. Also, the inclination angle of your roof can change the size of your roof. The more steep the roof is, the more area the roof occupies.

To incorporate the effect of a steep incline, you need to multiply the area you got from measuring the length and width of your house by a certain factor depending on your roof inclination. If you have a flat roof, then you would not need to multiply anything.

However, if you have a steep roof, you need to multiply the area of your roof by 1.3 for a low incline, 1.4 for a medium incline, and 1.6 for a high incline. Multiplying by these numbers will give you the approximate square footage your roof occupies.

Roofing Squares FAQs:

Is the square footage of a house the same as the roof?

You can calculate your roof’s square footage by multiplying the length and width of your house. But the square footage of your house does not equal the same as the area occupied by your roof. The latter can be larger due to things like ventilation, access areas, and inclination. For an exact measurement, contact your local roofing contractor or carpenter to take measurements of your roof.

What is a bundle of shingles?

A bundle of shingles is a predetermined amount of shingles that are sold together. These bundles are often sold in the range of 100 square feet. They are packed such that 3 or 4 of them would add up to 100 square feet, that is, a square of roofing. Manufacturers do this so that their customers can save time and effort in figuring out how many bundles they need for a certain roof size.

What is a square of roofing shingles?

As mentioned earlier, a square of shingles is 100 square feet. This is the number of shingles you would get if three or four bundles were laid out next to each other. You would use this number to calculate how many bundles you need for your roof.

How many shingles are in a square?

Typically, there are 15 to 29 shingles in a bundle of shingles depending on the shingle type and size. However, this number may vary slightly from one manufacturer to another. And 3 to 4 bundles are usually necessary to make up a square. So, in total, approximately 45 to 120 shingles would be necessary for a square of roofing.

What do 30 squares mean in roofing?

As you know by now that one square of roofing equals 100 square feet. So, 30 squares of roofing mean that approximately 3,000 square feet of roof will be covered. This is usually the area that can be covered by 100 bundles of shingles.

How many bundles of shingles do I need for a 12×12 roof?

A roof measuring 12 feet by 12 feet roof would have a total area of 144 square feet. If you divide it by 100, you would get approximately 1.4 squares. For one square of roofing, you would need three or four bundles of shingles. So, in this case, you will need approximately 4 to 6 bundles of shingles.

How many bundles cover a square?

In general, you would need three bundles for one square of roofing shingles. But if the manufacturer used a different bundle size, then it is possible that more or less than 3 bundles may be necessary to cover a square.

Can you put shingles over shingles?

Yes, you can. However, you must make sure that the shingles you are putting over are in good condition and will not compromise the roof’s stability. You must also make sure that whatever is under the old shingles can hold up to another layer of shingles, which means checking for weak spots like rotten wood or any standing water under the old shingles. As always, it would be best to have a professional do the job.

Contact Southern Roofing Systems for your roofing neeeds

Now you know what is a square of roofing, what is a bundle of shingles, and what do 30 squares mean in roofing!

If you need any further help, whether you are building a new roof or just replacing some of your existing ones, or just want to learn more about roofing, contact us and we will make sure you get the right information. We are eager to give our customers nothing but the best. Call for a free estimate today!

The post What is a square in roofing? appeared first on Southern Roofing Systems.

via Southern Roofing Systems <a href="" rel="nofollow"></a>
Read the whole story
42 days ago
Share this story

What is a Gable Roof?

1 Share

Orange Beach roofer service

A Gable roof is a type of roof that has two sloping sides which meet at the ridge to form a gable shape. They are also known as gabled roofs or pitched roofs. We will also go over some of their advantages and disadvantages in comparison to other types of roofs such as hip and flat ones.

Types of Gable Roofs – side, box, crossed, front, and Dutch

Gable roofs are generally made out of sheet metal or shingles, but you can also make gables out of wood. There are many gable roof types if the gables are square, triangular, pointed, etc. The gables can also be symmetrical or asymmetrical depending on what you want to use your gable roof for.

Side gable

Side gable roofs are gable roofs without a gable front (so, not gable gables). They still have the same gabled shape, but because there is no gable front, they are much less uncommon. These types of roofs are mainly used on small buildings or storage sheds.

Box gable

Box gable roofs are the most commonly used gable roof type. In this gable, you have a triangular-shaped gabled end on either side of your building with no slope at the top making them flat. This is where they earned their name from because box gables look like boxes sticking out from each end.

Crossed gables

Crossed gables also have two sloping sides that meet at the ridge to form the gabled shape. The difference is that these gables are one above the other rather than side by side. Crossed gables are commonly used on Tudor-style homes, and can be found in various styles of architecture including Colonial Architecture and Queen Anne style.

Front gable

Front gable roofs rise from the ground at an angle, with two gables on either side of the ridge. They are mainly found in Colonial Architecture and Prairie-style houses, giving them a barn appearance.

Dutch gable

Dutch gable roofs have two symmetrical gables that form an inverted V shape at the top of the roof, which is common for some Dutch architecture like canal houses (traditional Dutch homes).

Advantages of Gabled Roofs

Gable roofs provide multiple benefits, including strength, ventilation, and stability. Furthermore, gable roofs can increase curb appeal and help protect you from the elements by keeping the rain out of your home during storms and protecting it from high temperatures in the summer months. If you’re considering new siding or an upgrade to your roofing system, gable roofs are a good option to consider!

Visually Attractive

Gabled roofs are attractive and visually appealing. This makes gabled roofing a good choice for people who want to make the most of their homes’ exterior. Furthermore, gabled roofs can provide stability and ventilation. They can also increase curb appeal and help protect your family from the elements. If you’re considering new siding or an upgrade to your roofing system, gable roofs are a good option to consider!

More Headroom

Gabled roofs provide more headroom. This means that your living space will be well-ventilated and comfortable all year long. Gables also protect homes from the elements, including strong winds during storms or high heat in the summer months. If you’re considering new siding or an upgrade to your roofing system, gable roofs are a good option to consider!

Stability and Strength

Gabled roofs provide stability. This means that gabled roofing is a smart choice for homeowners who want a sturdy design that will last from year-to-year or even decade to decade. Furthermore, gable roofs can protect you from the elements by keeping rain, wind, and snow out. If you’re considering new siding or an upgrade to your roofing system, gable roofs are a good option to consider!

Increased Curb Appeal

Gabled roofs provide increased curb appeal because they are attractive structures that stand up well in high winds without breaking down during storms. They also help protect homes from the elements, which can increase a home’s value. If you’re considering new siding or an upgrade to your roofing system, gable roofs are a good option to consider!

Weather Protection and Energy Efficiency

Gabled roofs provide weather protection by keeping the rain out of homes during storms as well as insulation from hot temperatures in the summer months. Moreover, gables can help protect homes from high winds during storms without breaking down. If you’re considering new siding or an upgrade to your roofing system, gable roofs are a good option to consider!

Gable Roof Framing

A gable roof is framed by two gable end walls, opposite each other. These gable end walls are the outermost walls of the roof. The gable end walls, in turn, may be supported by a gable wall or rafter wall. A gable roof typically has a gutter and downspouts along its gables and ridges.

Gable roofs are usually framed with wood or metal studs, rafters, joists, girders, panels, boards, plywood, felt paper, and tar paper. They can have panels installed on the gables for decoration just like other roof shapes.

This gable roof is framed with gable wall studs, girt joists, purlins, girders, and diagonal sheathing. The spaces between the rafters are filled with plywood panels that have been cut to fit individual pairs of rafters where they meet at a ridge board. This type of framing allows for insulation between the gable end walls.

Gable roofs typically have gutter and downspouts installed along their gables, ridges, and gable end walls.

Gabled vs Hip Roof: Which is Best?

A gabled roof is the classic, old-fashioned style that’s been around for centuries. The slanted sides have long eaves which hang over the walls of a building to protect it from rain and snow. 

A hip roof is one in which all four edges are either vertical or sloped at 90 degrees to each other. They’re often used in modern architecture because they allow more space inside by removing the need for eave overhangs. 

Gable roofs are simple, easy to construct, and offer homeowners stability. Gables use an inner girt beam for stability as well as interior girt beams as stabilizers. The gable edge walls also provide strength and stability which make them an ideal shape for strong winds.

Hip roofs are typically sturdier and last longer than gable roofs. The gable roof is more vulnerable to gale winds because of its slant. However, gables are easier to construct and less expensive than hip roofs. Gabled roofs have a smaller pitch angle which allows water to drain off better when compared with hips which allow for greater accumulation of snow in the winter months.

So, gable roofs are usually easier to construct and offer homeowners stability. Hip roofs tend to be more expensive, but they last longer because gables aren’t as sturdy in high winds or snowstorms.


What are gable roofs made of?

Gable roofs can be constructed with wood or metal studs, rafters, joists, girders, panels boards plywood felt paper, and tar paper. They also have the option for gables to include decorative features like shingles or siding. Since hip roofs do not have gables, they are usually constructed from wood or metal studs rafters joists girders panels boards plywood felt paper, and tar paper.

What are gable roofs used for?

Gables can be adapted to a wide range of structures such as homes, barns, and garages. Hip roofs aren’t usually found on residential buildings but they’re often seen in commercial or warehouse applications since gabled roofs tend to not hold up well under the weight of snow accumulation.

What does a gable end roof mean?

A gable end roof usually refers to a gabled, double-pitched roof that has one slope on each side. With this type of gable design, the gables are not symmetrical and lack vertical ends or ridges. Gable end roofs can also be asymmetrical in pitch with two different pitches for the gables instead of

How do you repair a damaged gabled roof?

Repairing your own gabled roof is possible, but it’s safer and more practical to hire a gable roofing contractor.

What is the difference between Dormer and Gable Windows?

Dormer windows are installed on gabled roofs and gables that create a triangular shape. The gable will be pointed down and the dormer will be pointed up. The gable and dormer windows can also come in a variety of shapes and sizes. Older homes may have gables with gabled dormers while newer homes might use gabled dormers.

Gable windows are gabled, gated, or arched openings that can come with a single opening or be divided into two by vertical bars of wood. The gables will either point downward toward the ground or upward to create an arch-like shape. Gables may also be used as ventilation on roofs and walls and they often feature decorative designs like gothic gables with pointed roofs.

What are the different types of gable roofing materials?

Gable roofs can be made from many different kinds of material including wood, asphalt shingle, clay tile, metal slate, and concrete tiles. Different gabled roof designs will have their own set of requirements when it comes to gable roofing materials.

Contact Southern Roofing System For gable roofing services.

We’re gable roof experts and we’ll help you choose the right gabled roof for your home or commercial building. We provide free estimates and our gable roofs come with a warranty, so contact us today!

The post What is a Gable Roof? appeared first on Southern Roofing Systems.

via Southern Roofing Systems <a href="" rel="nofollow"></a>
Read the whole story
43 days ago
Share this story

How much does roofing cost

1 Share

Fairhope roof installation

The cost of a new roof can vary significantly depending on the type of system you choose to install. There are many different types of rooftop systems, and each has its own advantages and disadvantages. Also, other factors like ventilation, insulation, color choice, and aesthetics will also affect the overall price.

The most common types of roofing systems include asphalt shingles, metal panels or tiles, wood shake shingles, clay tile roofs, and slate roofs. The cost for these materials varies greatly (from $5to $30per square feet) depending on factors like installation, ventilation, durability, and the overall lifespan of the roof.

Pricing for different types of roofing systems

Homeowners have several options available for roofing systems. The type of system you purchase will depend on your budget, style preferences, and the amount of upkeep you want to do yourself. Once you choose a system, it is important to know how much it costs so that you can prepare your finances accordingly. Here are some common types of roofing systems and what they cost: 

Asphalt shingles

Asphalt shingles are the most common type of roofing system and also come at the least expensive price. They range in price from $4 to $7 per sq. ft. for installation and maintenance costs. Asphalt shingles do not last as long as other roof types and will need to be replaced after about twenty years (though those that cost less may only last ten).

Metal Panels or Tiles

Metal panels or tiles are a good option for homeowners who want a durable, low-maintenance roof with a life expectancy of 60 years (and sometimes more). The initial price can be on the high side, but with the average being approximately $12 per sq. ft., it is more economical over time than asphalt shingles.

Tin roofs

Tin roofs are very durable and come at a higher price than other types of roofing systems which are why they typically last longer (up to 100 years). Tin roofs can be more expensive upfront, but homeowners save money in the long run because these materials do not need annual maintenance.

Wood shake shingles

Wood shake roofs are beautiful and durable but require more upkeep than other types of systems (and can be difficult to install). They typically last about 30 years or less depending on the quality of the wood. The average cost for these shingles is $12 to $20 per sq. ft., though they can be more expensive if you choose a high-quality roof that will last longer than 30 years

Clay Tile Roofs

Clay tiles are a great option for homeowners looking to add value and beauty to their homes (and they can even increase the resale value of your home!). These tiles are long-lasting, durable, and require little maintenance. They typically last between 50 and 100 years although installing these requires expertise as well as special equipment. The average cost for clay tile roofs is $15 to $25 per sq. ft., with the most expensive being made of high-quality clay or terracotta tiles that are more resistant to damage

Slate Roofs

Slate is a beautiful type of roofing system, but it comes at one of the highest costs. The average cost of a slate roof is $50 to $100 per square foot, but depending on the type and quality this price could be even higher. For example, slate from Vermont costs more than double what other states do.

There are many types of roofing systems, and each has its own advantages and disadvantages. The most common types of roofing systems include asphalt shingles, metal panels or tiles, wood shake shingles, clay tile roofs, and slate roofs. The cost for these materials varies greatly (from $5to $30per square feet) depending on factors like installation, ventilation, durability, and the overall lifespan of the roof.

Installing a skylight Cost

If you choose a skylight, the average cost is typically between $900 and $2000 depending on factors like style preference, ventilation needs, insulation requirements, installation difficulty/requirements, color choice options (and how many of them), weather conditions in your area that might affect durability or longevity of the roofing system. On average, for a standard single-pane skylight you can expect to pay $900-$2200. A double-paned glass unit will be more expensive – the average is around $1500-3000 depending on your location and other factors.

Cost to Replace Roofing vs. Repair

The cost to replace roofing is substantially more than the cost to repair it. The cost to replace roofing is generally between $8 and $15 per square foot, while the cost of repairing a roof is around $2.50 per square foot.

As you can see, the cost to replace a roof varies greatly and has a huge impact on your budget. The average total cost of repairing a roof ranges from $1000-$3000 while the average total cost for replacing a roof ranges from $6,000-$10,000. Be sure to weigh all of your options and decide what is right for your home before making any decisions.

If you are unsure about whether or not your roof needs replacement, schedule an inspection with a professional who can answer any questions and provide recommendations on what needs to be done.

There are many different factors that go into determining how much it will cost to replace your home’s roofing system – the type of materials used, the size of your house, etc., so make sure you get multiple quotes before making any decisions 

You should also consider other repairs that may need to be made in order for your house’s exterior quality to meet current building codes- this includes things like painting or adding gutters & downspouts

How to Get a Roofing Estimate

The cost of replacing roofing depends on the size and type of your home, as well as what materials you choose for your new rooftop system. In order to get an accurate idea of how much it will cost to replace roofing, you’ll need several important details about both your roof and your home. This includes the following:

– The size of your house in square feet

– Whether or not you have a skylight present on your rooftop system

– What kind of shingles are currently present on the rooftop system (asphalt, metal, clay tiles)

– Your location – prices vary depending on where you live

– The type of roofing materials that will be used (wood, metal, etc.)

Which Factors Affect the Cost of a New Roof?

There are many different factors that can affect how much does a new roof cost including ventilation, insulation, color choice, and aesthetics.

Ventilation is important because it prevents moisture buildup in your attic (which causes mold growth). Having enough vents to properly ventilate an attic will help prevent this problem.

Insulation is also very important because it helps prevent your home from losing heat through the roof during the winter months, which can increase energy bills. The more insulation you have in your attic will help keep your house warmer which saves on heating costs.

Aesthetics are also an important consideration for many homeowners – having a roof that is aesthetically pleasing and goes with the overall look of your home can be very important to some people.

Tips on how to save money on new roofs

  1. Take into consideration the roof’s longevity when choosing materials
  2. Consider how much time will be needed to complete the project – if you’re in a hurry, it may not be the best idea to go with an expensive material that takes more time to install
  3. Compare prices of different materials at local hardware stores and online before making your final decision
  4. Make sure you include labor costs when comparing prices for new roofs so you can get an accurate picture of what it will cost overall
  5. When estimating labor costs, take into account how many people are necessary for installation and any additional fees that may incur (such as permits) 
  6. If possible, compare quotes from contractors who offer warranties on their work – this way if something goes wrong with your roof later down the line, they’ll fix it free of charge


What is the best type of roofing material for hot climates?

There are many different types of rooftop systems, but not all of them are the best for extreme heat. For example, metal roofs are better at resisting fire and heat than asphalt shingles or wood shake shingles.

A tile roof is also an excellent choice for hot climates – they’re resistant to fire, low maintenance, and come in many colors and styles. Tile roofs will last up to 50 years when they’re cared for properly.

Clay roof tiles are another low-cost option that lasts about 50+ years when they’re cared for properly.

Metal panels like copper and zinc roofing tiles also work well in hot climates – they offer durability, longevity (20-40 years), resistance to heat, fire resistance, and if they are coated with white paint they reflect heat.

What is the average cost to replace a roof?

Roof replacement costs can vary depending on your location, but it typically ranges from $3000-6000 for asphalt shingles and wood shake roofs – these types of materials are easy to install and maintain. The cost for other rooftop systems will be much higher due to their durability or unique materials.

What is the average cost to repair a roof?

The costs for rooftop repairs can vary depending on your location and what type of damage you’re facing – if your asphalt shingles are showing signs of aging, it may be time to replace them with new ones. If there’s significant water damage in one area, this will need to be repaired first. The average cost for a rooftop repair is $400-$600, but it may be more than that if you’re not properly trained to do the work yourself.

What does a steep slope mean?

Most roofs on homes and businesses are “sloped” or have an incline – this makes them easier to maintain and helps water flow off the roof. A “steep slope” means that your roof is either very steep or has a greater incline than normal – this can make it more difficult to install shingles, but not impossible for professionals with training and experience.

The best type of roofing material for cold climates

For colder climates, the best type of roofing material is typically slate roofs – they offer excellent insulation from both heat and cold, making them an excellent choice for residents in colder climates. On the downside, they don’t come cheap at approximately $1200-$2000 per square or more depending on your location. The cost for other types of roofs in a cold climate varies depending on their durability and unique qualities.

How much does flashing replacement cost?

Unfortunately, there’s not a set cost for flashing replacement. It all depends on what type of flashing and how much material you need to replace. For example, if your roof is showing signs of water damage and the flashing is starting to deteriorate, this will be more expensive to repair than if you’re having trouble with the flashing around the chimney because it will require more materials (and labor).

Will a roofer replace the fascia and soffit during my roofing project?

It is not always necessary to replace fascia and soffits at the same time as your roofing project, but if they are in poor condition it’s best to get this work done. The cost for a new fascia is $600-$6000 per linear foot – replacing soffit costs $200-4000 depending on how much you need replacing. Your expert contractor can help you determine if this work should be done at the same time.

The post How much does roofing cost appeared first on Southern Roofing Systems.

via Southern Roofing Systems <a href="" rel="nofollow"></a>
Read the whole story
44 days ago
Share this story



commercial roof contractors mobile al

There are many types of single-ply roofing materials, but the two most popular are TPO and EPDM. Both have their pros and cons. Understanding the differences between these two materials will help you make an informed decision about which one is best for your building.

What is TPO?

TPO is a polyethylene-based single-ply membrane that can be installed in warm and cold weather. It has excellent properties for adhesion and puncture resistance, and it’s resistant to ultraviolet light (which causes materials to break down). The material also has good elongation and flexibility characteristics (how much the material deforms before breaking).

What is EPDM?

EPDM, or ethylene propylene diene monomer, is a synthetic rubber that was introduced in the United States in the early 1970s. It has good adhesion and elongation properties, and it can be installed in cold weather (though not as easily as TPO).

TPO VS EPDM – Factors to Compare

Though they are both popular roofing options, they do have some differences. Understanding these differences is the best way to select which material is right for your building.


TPO has good puncture resistance and tensile strength (how much force it can hold before tearing), but it can be more expensive than EPDM because of its better performance and UV resistance.

EPDM has a high resistance to aging, but it doesn’t have an as good puncture or UV resistance as TPO.

Ease of Installation

Proper installation is the most important part of any roofing project. If it isn’t installed properly, even the best materials will fail.

Whether you’re using TPO roofing or EPDM roofing, the installation is easy. Both materials are installed by simply unrolling them on top of your existing roof and fastening them down with screws or adhesive.

Both TPO and EPDM can be attached in many different ways. TPO can be attached mechanically with self-sealing fasteners, adhesively bonded to the roof, or it can use an electromagnetic induction welding system.

EPDM is commonly attached by means of EPDM adhesive tape sealants on seams and around penetrations.  It can also be attached mechanically with self-sealing fasteners.

How seams are joined?

One of the main differences between TPO and EPDM is how the seams are sealed. In order to form a watertight seal, both materials have to use adhesive tape or other methods that essentially “weld” the pieces together.

For TPO, hot welding is used. For EPDM seam tape is used. Hot welding results in seams that are much more reliable, but it’s also more expensive. Seam tape is easy to apply, which makes it a popular choice for many contractors.

Installation costs

Costs can vary depending on the contractor who installs your roof, but TPO is usually more expensive than EPDM. In general, EPDM is about 20% less expensive to install than TPO.

TPO comes in short rolls that mean more seams to join. Also, the seams are hot welded by skilled labor which also charges higher rates

EPDM comes in wide rolls, so fewer seams have to be joined on the roof. It’s also usually easier for a contractor to install EPDM than TPO.

Life expectancy

TPO has a typical life expectancy of 7 to 20 years, with 10 years being the average.

EPDM usually lasts 20 to 30 years. While this is significantly longer than TPO, it’s also more expensive.

Track Record

TPO is a new material, so it’s difficult to measure its life expectancy. But based on the other polyethylene-based materials that are out there, 7-20 years is reasonable. Also, the manufacturers are continuously testing out new formulations that could potentially extend the life expectancy of TPO.

EPDM has been out for decades, so it’s had plenty of time to build up a track record. Again, 20-30 years is the average life expectancy based on many installations over time.

Maintenance Costs

Both materials are very durable and relatively maintenance-free. But EPDM roof requires more maintenance than TPO.

An EPDM roof is more likely to need repairs because polymers in EPDM might break down or tear with age. Also, EPDM requires regular inspections for wear and tear during the warranty period.

TPO is not as easy to maintain, but it still requires very little maintenance after installation. It is more expensive than EPDM, but it requires fewer repairs over time.

Energy Efficiency

TPO roofing in white reflective color can reflect sunlight and keep your building cooler, which can save you money on energy costs. TPO is also available in dark colors that will absorb the sun’s rays and keep your building warm. This can also save you money on heating costs during colder months. So if you want to go for TPO choose the color that is suited for your climate

EPDM is naturally black and is designed to absorb the sun’s rays. This helps heat your building in the winter, but it can also make it hotter inside during the summer months. However, you can get an EPDM membrane that is coated with a reflective white layer. This helps keep buildings cooler on sunny days and is energy-efficient.

Resistance to Hailstorms

TPO can be used in areas that receive an average amount of hail. But if you live in a part of the country where hail is common, EPDM roofing is a better choice because it’s more robust and durable than TPO.

EPDM is designed to withstand hail. It can handle almost any type of weather condition, including hail storms. The rubber material bounces hail away instead of breaking apart.

Resistance to Chemicals

TPO is much more effective in resisting chemicals, which makes it a popular choice for restaurants and other industries where chemicals are regularly used.

However, asphalt is not resistant to TPO. So, if you are installing a TPO roof over the asphalt, you must use a separate layer of protection to keep the asphalt from seeping through.

EPDM is resistant to chemicals, but it’s not as nearly as much as TPO roofs. So if you have a building where chemicals are used regularly, use EPDM roofing instead of TPO. If your building uses asphalt roofing

Mold and Mildew resistant

Both are good at resisting mold and mildew. But TPO is better at resisting mold because it’s less porous than EPDM. If your building is located in a wet or humid area, TPO roofing is more likely to keep out moisture.

Resistance to UV Rays

UV rays can break down a membrane, which can lead to leaks and other problems. So it’s important to choose a roofing membrane that is resistant to UV rays in order to reduce maintenance costs in the long run. TPO is more effective at resisting UV rays than EPDM.


If you notice water entering your building, that’s a sure sign that something is going on with your roof. On a TPO roof, the usual cause of a leak is that seams have separated, allowing water to enter your insulation.

To restore the TPO roof, you need to clean all debris from the roof and remove any blisters that might be present. Then you can use a spray-on adhesive or tape to seal seams and restore your roofing system.

EPDM is another story. If water enters your building, it’s most likely because of a crack in the membrane or a penetrating object such as a nail or screw that’s poking through the rubber or plastic. You will need to cut out and remove the damaged part, then prepare the roof for patching by cleaning debris from the area around the crack. Then you can apply a layer of elastomeric coating or flexible adhesive.


TPO roofs are manufactured in thicknesses of 45-60 mils, which is similar to the thickness of most EPDM membranes. But if you are comparing roofing membranes with a thicker membrane, TPO will offer more durability because it has greater tear strength and puncture resistance than EPDM.

Roll size

The average TPO roll size is 8 feet wide by 50 or 100 feet long. The average EPDM sheet size is about 50 feet wide by 50 feet long, so it’s larger than the typical TPO roll size. Fewer seams also mean fewer places for water to leak into your building. Plus, it is easier to install a large sheet of EPDM since it can be laid out flat on the building. The seams end up at the inside edges where you won’t be able to see them.


As EPDM becomes exposed to sunlight, it shrinks and pulls away from its seams. Over time, the membrane might shrink enough that your roofing system will no longer be waterproof.

TPO does not shrink as much as EPDM, which makes it a better choice for roofing systems in environments where temperatures and weather fluctuations can change on a regular basis.

Seam strength

When compared to EPDM, TPO has superior seam strength. This means that seams are less likely to separate or tear in high winds. This is one reason why TPO is a better choice for roofs located in windy areas.

In Conclusion

Both TPO and EPDM are durable roofing materials that last for many years. However, when compared to EPDM, TPO offers better seam strength in windy conditions and resistance to shrinking in sunlight. TPO also resists mold growth better than EPDM.

If you have a building where chemicals are used regularly, use TPO roofing instead of EPDM. If your building is located in a wet or humid area, if mold or mildew is present on the building, or if you are concerned about UV rays breaking down your membrane over time, choose TPO. EPDM is better suited for roofs in hot climates with minimal temperature fluctuations.

Contact Southern Roofing Systems for all of Your TPO and EPDM Roofing Needs

There are many factors to consider when choosing a roofing material for your building, such as the projected lifespan of the system and maintenance costs. If you want to make an educated decision about which type of roofing is best for your building, contact Southern Roofing Systems today. We offer free quotes so you can see how installing TPO or EPDM on your commercial building can be affordable for your business. Give us a call today!


The post EPDM vs TPO appeared first on Southern Roofing Systems.

via Southern Roofing Systems <a href="" rel="nofollow"></a>
Read the whole story
45 days ago
Share this story

What is Rubber Roofing?


epdm tpo pvc roofing mobile al

Utilizing rubber roofing for your business is a great way to cut costs and increase energy efficiency. This material can be used on virtually any type of building, including warehouses, factories, large storage units, or other commercial buildings.

Rubber makes it easy to create an energy-efficient roof. The material can be easily cut to accommodate ventilation or other features, and it doesn’t require labor-intensive processes like concrete or metal roofing materials.

Easier on your wallet and on your time. Rubber roofing is easier to install than other roofing materials, so you can save time and money on installation. Depending on the structure and size of your building, the rubber sheets can be affixed to the roof and tightened into place with minimal effort.

If you’re looking for ways to save money while also protecting your building, investing in rubber roofing might be one of the best options.

What is Rubber Roofing?

Rubber roofing is a material made of rubber that is used as a weatherproof and waterproof roofing material. It consists of multiple layers of rubber, with some elasticity to it, and can be purchased in sheets for installation over your roof. Also, you can coat the roof in a single layer by spraying it on. Rubber roofing is generally black or white, but different colors are available too.

Types of Rubber Roofing

Rubber roofing can be manufactured from either natural or synthetic rubber. Other than the production materials, the difference between types of rubber roofing is how it is applied. The most common types of rubber roofing are:

  1. Multi-ply roofing systems that include Built-up Roofing and Modified Bitumen Roofing
  2. Single-ply Roofing that includes, PVC,  TPO, and EPDM roofing
  3. Coated or spray-on roofing that includes coal tar epoxy and mastics

Multi-ply Rubber Roofing Systems

Multi-ply roofing consists of rubber with layers upon layers of felt paper in-between. This type of roofing is usually used on flat roofs, can be installed over existing roofs, and works well in cold climates. There are further two types of this rubber roofing system:

Built-up Roofing

This is the cheapest, most common type of multi-ply roofing system. It’s produced by combining various layers of felt with emulsion or asphalt, and it comes in rolls for easy installation. Most building contractors use this type due to its low cost and ease of installation. Also, since there are many layers, it’s very durable and stands up well to wind and other types of harsh weather. To prevent it from UV radiations and make it suitable for foot traffic, a top layer of gravel is normally applied.

Modified Bitumen Roofing

This is an advanced type of multi-ply roofing system that’s used for industrial, commercial, and heavy traffic buildings. The material consists of one layer of rubber with a second layer of high-performance synthetic underlayment material. With fewer layers than built-up roofs, modified bitumen roofs are very durable and can stand up to extreme weather. Their strength lies in the reinforced top layer. They are easier to install than BUR since modified bitumen roofing now comes in self-adhesive rolls that do not require hot mopping or torch-applied methods.

Single-ply Rubber Roof Membranes

A single-ply roof is a type of rubber roofing that consists of a single layer of material. It comes with a number of benefits, including being lightweight and easy to install, recyclable, affordable, and suitable for use with most roofs types. Also, since it’s made from one single layer, it’s very simple to install and maintain. Plus, in certain cases, the entire roofing system can be installed in one day by a single installer.

Three types of single ply roofing  are as follows:

PVC Roofing

This is a highly adaptable material that’s available in a wide range of colors and styles. It can be ordered as smooth or textured, it comes with an easy-clean surface that resists dirt build-up, and it doesn’t corrode or rust even if exposed to harsh weather. In addition, PVC roofing is resistant to UV rays and high temperatures.

TPO Roofing

This type of rubber roofing blend consists of a combination of polyethylene and propylene. Since it uses a polymer-based material, TPO can be made flexible depending on the manufacturer’s specifications. Also, the material is flame-resistant and comes with a smooth surface with excellent resistance to chemical spills.

EPDM Roofing

This type of single-ply roofing system consists of ethylene propylene diene monomer rubber and is sold as self-adhesive flat sheets. It’s popular because it’s made from one o the safest and most durable polymers available. In addition, it’s tightly bonded, waterproof, and comes with a high-temperature exposure resistance.

Coated Rubber Roofing

These systems are made by applying coal tar epoxy to EPDM rubber. Coal tar is one of the few products that can be safely applied directly to rubber. The coating can be applied in both liquid or solid form and provides extra protection for the roof against oil, grease, and chemicals. Plus it has ultraviolet resistance which makes it suitable for long-term exposure to sunlight.

Rubber Roofing Benefits

Rubber roofing is a cost-effective way to protect your building from water damage. The system also provides extra insulation and energy savings, as well as it’s made from one of the safest materials available today. In addition, installing rubber roofs over existing roofs requires less labor and time than replacing an entire roof.


Rubber roofing is extremely durable and will last for decades with proper care. It can also be customized to fit any space, which makes it perfect for any commercial property. The material also offers excellent protection against temperature fluctuations, ultraviolet rays, hail, snow, ice dams, and even fire.

Environmental Friendly

Rubber roofing is made from recycled materials and can be recycled itself when it reaches the end of its useful life. Some are 100%  recycled, while others are made from at least 50% reclaimed rubber.


Rubber roofing is a lightweight material that can be easily installed onto most building structures with minimum disruption to the property. 


Rubber roofing systems are very affordable compared to other roof types on the market. They have a lower initial cost but offer significant savings over time with their excellent insulation and durability.


Due to their durability and lightweight, rubber roofs can be walked on without causing any damage. Their flexibility also makes them perfect for high-wind areas since they won’t easily tear or rip during heavy storms. Furthermore, rubber roofs are resistant to fire and won’t emit dangerous fumes or toxic substances should a fire ever occur.

Natural insulator and Energy Saver

Multi-ply Rubber roofs are excellent at keeping heat inside during the winter and out during the summer. This results in significant energy savings for commercial property owners, which can offset most of the initial cost of installing rubber roofing.

Single-ply rubber membrane with light colors reflects the sun more efficiently, keeping your building cooler. This can result in an annual energy savings of up to 15% and a significant reduction in carbon footprint.


When it comes to the money aspect of any roofing system, rubber roofs are one of the most inexpensive options. Rubber roofs are not only less expensive in price but they require fewer resources to install and maintain, making them an environmentally friendly option for your building or home.

Easy maintenance

A rubber roof doesn’t require a lot of maintenance. Since the system is made from one solid piece, it has fewer crevices and seams that can trap dirt or other types of debris. All you have to do is simply hose the roof down every couple of months to remove any surface buildup.

Easy to install

Rubber roofs are very easy to install even for commercial buildings with flat or low-slope roofs. It is because they are flexible, lightweight, and easily customizable to any access areas them, making perfect for roof decks or any other kind of flat surface.

Prevents moisture infiltration

Rubber roofs are 100% waterproof and prevent any moisture infiltration into the building structure, which is especially important in commercial buildings where water can create dangerous conditions for the staff or make entire areas inaccessible.

Mold and  mildew-resistant

Rubber roofs are naturally resistant to mold and mildew. A rubber roof with preventive maintenance can last for decades without the risk of developing mold or mildew, which is perfect for outdoor structures in humid areas.

Fire Resistant

Rubber roofs are resistant to fire and won’t emit dangerous fumes or toxic substances should a fire ever occur. Since rubber is highly heat-resistant, it can be exposed to direct flames without being compromised.

Noise insulation

Rubber roofing provides excellent noise insulation because it is naturally resistant to sound and vibration. This makes it perfect for any type of commercial building, such as construction yards and warehouses, where noise can affect the surrounding area.

Easy to repair

It is easier to find and patch leaks in single-layer rubber roofs than in other roofing systems. Leaks can be detected and repairs made simply by following the waterline on the roof, which should lead you directly to the damaged area.

UV Protection

Most of the rubber roofing products on the market provide excellent UV protection, which allows them to last longer and protect your roof from fading in the sun.

Rubber Roof Potential Weaknesses

There are some things that if you keep in mind and take proper precautionary measures, you should have no problem using Rubber roofing and your roof will last you decades.

Some of the most important things to keep in mind when installing, maintaining, or repairing a rubber roof are the following:

  • Rubber roofs must be sealed during installation. This is necessary to prevent water leakage and to make sure all seams are properly sealed. Sealing the roof is also important for its appearance—over time it might crack and lose its shine if not properly maintained.
  • If you do not properly maintain your roof, over time it will naturally get dirty and discolored. It is advised that every three to five years you apply a coat of rubber cleaner or paint to restore the original color and appearance of your roofing system.
  • Periodic maintenance is required for rubber roofs to avoid future problems and minimize the risk of leaks. It is recommended that you inspect your roof yearly for signs of damages or problems, especially after harsh weather conditions.

Rubber Roofing Summary

There are many different reasons why rubber roofs are the perfect roofing solution for your specific needs. They are completely waterproof, fireproof, mold-resistant, and one of the most durable materials available on the market today. Rubber roofs also provide excellent noise insulation and can be used to create usable outdoor space with a roof deck.

One of the major concerns people have when deciding whether or not to use rubber roofing is how it is expected to be maintained. As long as you take proper precautions when installing, maintaining, or repairing your rubber roof, you should have no problems using it for decades.

Rubber Roofing FAQS

Is a rubber roof better than shingles?

As you can see, there are many different types of rubber roofs. They’re all really good at protecting your home and preventing water damage. However, some types of roofs are better than others for certain climates. For instance, a single-ply roofing system is better suited for a wet area such as a TPO roof. Some people even use EPDM roofing instead of PVC in really cold areas because it holds up better due to the high temperatures.

How long does a rubber roof last?

A rubber roof is a very durable type of roofing product that can last for many years when applied and maintained correctly. Rubber roofs provide excellent protection against UV rays, extreme temperatures, and even hail. With such a wide variety of rubber roofing products available in today’s market, you can find one that is designed for your specific climate and is sure to last.

Does a rubber roof smell?

There is a slight smell of a rubber roofing product at first. It’s not too bad, however. You can expect the rubber-like scent to dissipate over time as the material is exposed to UV rays and other environmental factors.

Is PVC roofing the same as EPDM?

EPDM and PVC are both terms used to describe the rubber roofing material. EPDM stands for ethylene propylene diene monomer while PVC is a plastic polymer, also known as polyvinyl chloride or vinyl. The two materials can be very similar in appearance and properties, though they should not be confused since they are both unique products.

What is the difference between a TPO and PVC roof?

The two products are very similar in appearance and properties, though they should not be confused since they are both unique types of rubber roofing materials that have different qualities and uses. TPO is cheaper and is more established.  However, PVC is newer, more expensive, and has a higher resistance to chemicals. 

Is TPO considered a rubber roof?

Although TPO is a Plastic Polymer, it is actually considered a type of single-ply rubber roofing system because it feels like rubber. It is flexible, waterproof, and fireproof like other rubber membranes.

Is TPO roofing better than EPDM?

There are a number of factors to consider when determining which type of rubber roofing product is better for your specific needs. TPO is a newer kind of rubber membrane that has been rapidly growing in popularity over the past few years. EPDM, on the other hand, has been used as an effective waterproof material for many decades and is well-known throughout the industry. TPO is generally considered to be better for colder climates, though EPDM has a longer life expectancy overall.

Metal vs Rubber Roofs, which is better??

While metal roofing is a very popular type of roof, rubber roofs are beginning to gain in popularity. In fact, there are many benefits that make rubber roofs better than other options, including their flexibility and the initial cost. They’re also easy to install and easier on the wallet.

Why should I choose a rubber roof over other types?

There are many reasons to choose a rubber roof over other types of roofs, including the fact that they’re environmentally friendly and cost-effective. The initial price of rubber roofs is lower than metal roofs, but they last longer and only need basic repairs every five to ten years. In addition, rubber roofs are green roofs because they’re naturally made from a sustainable resource and require very little maintenance.

Can you walk on rubber roofs?

Yes, it is possible to walk on a rubber roof. This can be done with great caution, however. It’s important to make sure the surface of the rubber has been properly prepared for this activity. The proper steps should be taken in order to prevent damage or harm to both yourself and the roof itself.

How do you maintain a rubber roof?

There are various ways to clean and maintain a rubber roof. Most experts recommend using just water to clean it, while others may use soap or bleach if necessary.

Contact Southern Roofing Systems for Rubber roofing today!

At Southern Roofing Systems, we have been specializing in roofing systems that are designed for your specific climate and needs. Our team of experts is sure to provide you with a product that is sure to last. Contact us today to learn more about our product line and how we can assist you with your next roofing project!

The post What is Rubber Roofing? appeared first on Southern Roofing Systems.

via Southern Roofing Systems <a href="" rel="nofollow"></a>
Read the whole story
46 days ago
Share this story

Commercial Flat Roof: What You Need To Know


commercial roof contractors mobile al

When you own a business, it is important to have adequate protection from the elements. You want your building to be as efficient as possible so that you can save money and run at optimal capacity. One way to ensure this happens is by installing a commercial flat roofing system on your building. These roofs are particularly beneficial because they offer a waterproof surface with an easy-to-maintain design which will help protect your property for years down the road. However, there are many things that you should know about commercial flat roofing before deciding if this option is right for you. Read on to learn more! 

Commercial Flat Roof Types

There are many different types of commercial flat roofing systems, and each has different qualities and specifications. Each type of commercial flat roof has its advantages and disadvantages which you will learn about below

Built Up Roofing

This type of commercial flat roofing system has been around for years. It is essentially constructed by creating a thick layer of materials on top of the roof which is then compacted together, providing an even surface with excellent water resistance. There are different “layers” to the built-up roofs, but in general, they include asphalt or coal tar, felt paper that provides insulation and protection, and the final layer is the top UV-protection material like gravel or mineral granules.

Pros: Typically has a longer lifespan of 15-20years; is well suited for warmer climates; You can walk on a built-up roof without causing damage.

Cons: In cold climates, there is a risk of ice dams due to the thick nature of the roofing material. It can also be expensive to install depending on the size of your building and many other factors.

Modified Bitumen Roofing

This commercial flat roofing system is quite similar to the built-up roof. The main difference is that instead of heavy gravel or minerals for the final protective layer, modified bitumen uses a strong polymer material. This type of commercial flat roofing system can last upwards of 30 years due to its durability and chemical properties. Like the built-up roof, some modified bitumen roofs are completely waterproof and suitable for any climate.

Pros: Has a longer lifespan than built-up roofs; Has excellent weather resistance and can last up to 30 years; is well suited for any climate; is less expensive than other commercial flat roofing systems such as TPO roofs.

Cons: Requires an experienced installer; Requires regular maintenance to avoid ponding or leakage.

Thermoplastic Membrane Flat Roof (PVC or TPO)

This type of commercial flat roofing system is both strong and flexible, which allows the material to easily adapt to weather changes. The thermoplastic membrane roof can come in either PVC or TPO form, but both are durable and long-lasting (15 – 20 years). This particular type of commercial flat roofing system also has a reflective surface, which can limit heat absorption in areas that are prone to high temperatures.

Pros: Offers excellent UV resistance, flame resistance, and protection against pooling or leakage; has a long lifespan when properly installed; comes in many different colors for aesthetic appeal.

Cons: Expensive upfront cost; requires professional installation.

Rubber Membrane Flat Roof (EPDM)

This type of commercial flat roofing system is very similar to TPO membranes; however, EPDM roofs cost less and require less maintenance. Although this roof is known for its durability, it can also be more susceptible to damage by ultraviolet rays than TPO membranes.

Pros: Less expensive than most other commercial flat roofing systems; comes in many different color options for aesthetic appeal; has a long lifespan.

Cons: Not as durable as TPO membranes; cannot withstand ponding or leakage; requires regular maintenance to avoid damage caused by ultraviolet rays.

commercial roofing mobile al

Metal Flat Roofing

This type of commercial flat roofing system is made up entirely or partially of metal. Although this is not the most common system, it is one of the most durable and long-lasting. This type can last anywhere from 50 to 100 years with minimal maintenance needed during that time frame. It is not the most aesthetically appealing option because it does have a rather industrial look to it, but if you’re looking for something very low-maintenance, metal roofs are the way to go.

Pros: Very low-maintenance; very long lifespan; will last indefinitely with minimal maintenance.

Cons: Quite expensive upfront cost; requires professional installation.

Green Flat Roof System

A green roof is made up of living plants. This unique, up-in-coming option offers an aesthetically pleasing finish and a lower energy bill. They can even absorb air pollutants! However, this type of flat roof does require a lot more care and maintenance than the others, although it is very simple in comparison to other gardening tasks.

Pros: Aesthetically pleasing; offers environmental benefits such as absorbing pollutants and energy savings; requires little maintenance.

Cons: It May be difficult to install correctly on your rooftop; can cause damage during installation; costs more than other commercial flat roofing systems.

Concrete Flat Roof

This type of commercial flat roofing system is made up either partially or entirely of concrete. This is another option that can last a long time with very little upkeep if any during the lifespan. Although the upfront cost is more expensive than rubber membranes, it does last longer. One of the best things about this type of commercial flat roof is that it has no seams which make them maintenance-free.

Pros: Very low-maintenance; has no seams which make it maintenance-free.

Cons: More expensive upfront cost compared to other flat roofing systems; may have issues with leaks if not installed correctly.

Spray-on Roof Coating

This type of commercial flat roof is made up either partially or entirely of spray foam. It can be applied over either a built-up or modified bitumen system. The spray foam adds a layer that protects ponding or leakage. This type of commercial flat roof can last up to 40 years. It has become very popular recently due to its ease of installation, inexpensive cost, and ability to adhere to difficult rooftop shapes.

Pros: Very cost-effective; Offers excellent protection against pooling or leakage; costs less than TPO membranes; comes in many different colors for aesthetic appeal; Allows for easy repair in case of damage.

Cons: Requires regular maintenance to avoid damage caused by ponding or leakage; cannot withstand excessive heat. Requires professional installation; not as durable as TPO membranes.

epdm tpo pvc roofing mobile al

Benefits of Flat Roofing For Commercial Buildings

Commercial flat roofs are an excellent choice for businesses and other establishments where aesthetics and functionality truly matter. Flat roofs bring many advantages to these types of buildings including:


Commercial flat roofs are favorite amongst business owners for a few reasons, but the main reason is that they are extremely durable. If you want something that will last for years and require very little upkeep, this may be your best bet. Commercial flat roofs are made from a material that is virtually indestructible which means that once they’re installed, you won’t have to worry about them for quite some time.

Ease of installation

Another benefit of commercial flat roofing is that it can be installed in a short time with minimal disruption to your business. If you want something that will not cause your business to shut down for extended periods, this is the perfect option. Since commercial flat roofing can be installed quickly with minimal effort, you won’t have to spend a lot of money on specialized labor which will save you money


Commercial flat roofs offer one of the most weather-proof surfaces that you can find which makes them perfect for almost any business owner. With the right protection, you won’t have to worry about hail damage or other extreme weather events that may affect your property. When you choose commercial flat roofs, you can rest assured that your business will be protected from the elements for years to come.

Environmental impact

Flat roofing systems offer one of the lowest environmental impacts which makes them a popular option amongst environmentally-conscious business owners. Since there is no potential damage to the environment, this system of roofing is a favorite for people who are vigilant about the planet. If you want to install a roofing system that is good for the environment, commercial flat roofs are an excellent choice.


There are many benefits of commercial flat roofs which makes them an ideal option for business owners looking to save money. Since these roofs can last decades without requiring major upkeep, they are often considered a more cost-effective option. If you want something that will save time and money over the years, commercial flat roofs might be your best bet.

Design flexibility 

You can select from a wide range of colors and styles when it comes to commercial flat roofing which makes them more versatile than other kinds of roofing systems. With so many colors and styles to choose from, you can customize the look of your business to create a perfect aesthetic for your customers. If you want something that will enhance the look and feel of your business, commercial flat roofs might be the right choice.


One of the best parts about commercial flat roofs is that they require very little maintenance which makes them a great choice for business owners. Instead of worrying about your roof every day, you can install this kind of system and not have to worry about it for ages. If you want something that doesn’t take up too much time or effort, it might be a good idea to invest in commercial flat roofs.

Energy Efficient

A flat roof will save you money on your HVAC unit by letting sunlight warm up the air inside your building, or by just blocking the heat coming into your property. If you want to lower your energy costs each month, this might be a good option for you. Commercial flat roofs will light colors are designed to reflect away sunlight which keeps the temperature of your property lower than it otherwise would be. And the darker color found in some commercial flat roofs absorbs more energy which means that your property will stay warm even on the coldest days of winter.


Commercial flat roofing is customizable and can be made to fit any size of the building large or small. Customizable options such as color, thickness, and material make it easy to find a perfect match for your needs. If you want to choose from a variety of options, it might be a good idea to invest in commercial flat roofs.

Potential drawbacks

While commercial flat roofs have a lot of potential benefits, you need to consider the possible drawbacks of this type of roofing system so you can extend the lifespan of your roof.

Keep it clean:

When it comes to your roof, keeping it clean is essential for protecting it from damage. Make sure you have someone who will regularly sweep away anything that could potentially damage the surface of your roof or clog up any drainage systems.

Professional Installation:

You need to make sure that your flat roof is installed properly so you can extend its lifespan as long as possible. If you aren’t experienced with roofing systems, or if your flat roof doesn’t quite match up with the design of your building, you should hire a professional.


If a commercial flat roof develops a leak it can be a potentially costly problem to fix. If you want to reduce the amount of time that it takes to repair a flat roof, you should regularly check for damages and address them as soon as possible.

Commercial Flat Roof Summary

Commercial flat roofing offers many benefits to business owners which make them an excellent choice. If you want something cost-effective, durable, and environmentally friendly, commercial flat roofs might be the perfect choice for your company. With so many reasons to invest in this kind of roofing system, it’s easy to see why they are becoming so popular.

Business owners who are tired of worrying about their roofs every day should consider investing in commercial flat roofs. With so many color and style options, you can find something that matches the aesthetic of your business perfectly. And with very few maintenance requirements, you won’t spend too much time or effort on your roof each month. If you want something that is customizable and will save on energy costs, commercial flat roofs might just be the perfect choice for your business. You’ll be able to protect your investment and save money in the process.

Contact Southern Roofing Systems for a free commercial flat roof consultation today

If you want to read more about commercial flat roofs or if you want a free quote for a purchase, contact our team today.

We will be happy to help with whatever you need. We pride ourselves on being professional roofers and we make customer service a top priority. If you have any questions at all, don’t hesitate to call us.

Contact us for a free quote today!

The post Commercial Flat Roof: What You Need To Know appeared first on Southern Roofing Systems.

via Southern Roofing Systems <a href="" rel="nofollow"></a>
Read the whole story
48 days ago
Share this story
Next Page of Stories